Medical N95 Face Mask Making Machine , N95 Mask Production Line Easy Operate
KN95 mask equipment is the special equipment for the production of disposable KN95 masks.It can automatically complete the mask body molding,automatic nose bridge reinforcement, and automatic ear band welding.
It is the auto equipment which is used to the product of face masks,It suitable for the material of non woven fabric, activated carbon and filter material from 1-5 layers. The face mask machine will finish all the processing from the feeding to nose-clip fixing, edge sealing, cutting the finished products.
According to the different materials you use, the finished products can reach the standards as N95, FFP2, etc.This face mask machine has features as stable performance, high productivity, low error rate and easy operation, etc.
| Size |
6800mm(L)×3600mm(W)×1900mm(H) |
| Mask specification |
175*95mm |
| Production efficiency |
100-120PCS/min |
| Qualification rate |
98-99% |
| Failure rate |
2% |
| Weight |
≤2100kg, ground load bearing > 300kg |
| Working power |
220VAC ± 5%, 50z, rated power about 6.5-8.5KW |
| Compressed air |
0.5 ~ 0.7MPa, the use flow rate is about 300L / min |
| Operating environment |
temperature 10 ~ 35 ºC, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness not less than 100,000). |
Plane Mask Production Process:
1) Three layers of non-woven fabric materials are stacked together through a machine
2) Roll up and stitch the nose clip into it
3) Make a large piece of non-woven fabric gradually narrow from left to right along the slope to make a "folding structure"
4) Tableting: flatten the surface of the mask
5) Fully automatic single cutting and hemming of masks
6) Then use a non-woven fabric to trim the mask
7) Cut the edge again
8) Fix the hanging ear rope by hot pressing
9) Finally pass the quality inspection, sterilize and package the finished product
Standard export packaging:
1. Apply anti-rust oil to the equipmenteasy rustypart and carry out anti-rust treatment.
2. The whole machine was wrapped with stretch film for protection,and the equipment control cabinet and other components are protected against shock with packaging materials like XPS foam board and EPE foam sheet.
3. Reinforceeasy-movepart of the equipment.
4. Put desiccant before packaging to avoid rusting equipment during sea transportation.
5. Use New Zealand imported bluish pine wood or American Douglas fir wood as the bottom support, 12mm multi-layer plywood for side panels, all wood fumigated. We cooperated withexperienced and professionalexported wooden packaging manufacturing enterprises to make final package.
| tion and commissioning. |
Due to the special period, party A(Supplier) is unable to provide on-site installation and debugging service. After installation and debugging, party A(Supplier) shall notify party B(Buyer) to accept the equipment. Upon completion of acceptance, party B(Buyer) should ship the whole machine.Provide non - contact installation instruction such as instructional video and remote video instruction. Non-epidemic period, We will send 1~2 engineer for installation, training and testing in customers' factory, offer complete technical support, after-sale service, maintenance skills training. The air ticket, hotel and food accommodation shall be offered by the buyer and need to pay 100 USD/day/person as technical fee. |
| Warranty period and service |
- During the warranty period, if it is a product quality problem, the supplier shall be responsible for the maintenance and provide the maintenance accessories (vulnerable parts, such as ultrasonic waves and mufflers, force majeure or the buyer's reason for the equipment damage, it does not belong to the quality warranty scope).If the equipment is damaged due to the buyer's fault, the maintenance fee shall be borne by the buyer.
- If the buyer USES repair services or replacement parts not provided by the supplier or approved by the supplier, the warranty period will be suspended in advance.
|
| Delivery time |
30 days |
Product Tags:
|
|
Medical N95 Face Mask Making Machine , N95 Mask Production Line Easy Operate Images
|
